Shaving Adapter

Bat rolling is a process which accelerates the break of any composite or Bat Baseball Softball. Bat rolling is achieved by the use of a machine Bat Rolling. These machines compress the body of the bat in the different stages. As the bat is compressed, it is powered by (perpendicular approach) or rotation (parallel method) along the barrel. As the bat is rolled resin binds the layers of composite material starts breaking. This happens in all composite bats normal use. The problem is most bats need at least 500 rounds before you actually begin to practice. Driving the racket with a bat rolling machine you do that in a control environment. This ensures the racket is broken into uniform and perform at its optimal level.

There are 3 typical ways of rolling a bat. They are perpendicular, parallel and more recently a combination of both. This method of combination of perpendicular parallel monitoring is sold as the best way to ride. I agree it has some potential benefits but our honest opinion (which is based on 5 + years of running) is that no matter how you roll your bat and also if you have the bat rolled by a company of experience you run the risk that such damage Whether your bat with supercharging. The key to Bat Rolling is that you take your time to ensure that ALL areas of the barrel is compressed uniformly. The most likely reason for this new method of rolling is because there are many new and inexperienced enterprises (self-proclaimed authorities Bat) out there who simply do not know how to properly roll a perpendicular struggling to get the best results . What's funny is these same "Bat Rolling authorities" have videos of the roll bats in 5 minutes or less. I can assure you that you can get a roll well 5 minutes or less.

Bat Rolling Pros

• The warranty is not made
• minimal decrease of sustainability
• Undetectable
• Simulate your normal break process
• Increases good performance (20-40ft average)
• Mainly beneficial for bats Composite

Cons Bat Rolling

• Slight decrease in durability (very little)
• Some consider it cheating
• MUST be done by a professional company bat rolling

Bat Shaving is the process where the interior walls of a barrel of baseball or softball bat are thinned. When walls are thinned it increases the trampoline effect of the barrel, and this increase in speed of the batted ball. It is common to see increases of 40-50ft when done correctly. Almost all qualified companies Bat Shaving Roll hits you when shaving. We recommend finding a reputable business that offers shave, Rolling & End Loading all in one package. So you get the best result.

Bat shaving should be done using a professional CNC Lathe with digital display. This ensures a precise and consistent amount are taken from the interior walls. You must be careful when choosing who you work Bat shaving. There are several companies (on eBay and the Internet) that will use a drill with an adapter or sanding to be lapped. WARNING - This is not how you want your swing to get shaved. One of 2 things will result. Your bat prematurely break or you will not get optimal results. Be sure to ask questions to ensure they use a CNC lathe.

During the process of BAT SHAVING there are about 1-2 ounces of material removed. The optimum amount to be removed depends on the type of bat. All bats are slightly different. A bat shaving qualified company know how to get out. Once the material is removed you need to put that weight back in the bat. It is usually given in the cap. This gives you a 1 -.